66
1968 DBS V8 Prototype - a very significant historical vehicle
1/11
Passed
Red Row, Stanley
Description
This stunning Aston Martin DBS Prototype represents one of the most important milestones in Aston Martin history: the commencement of the V8 generation. Not only that, but '5002/R' started life in the autumn of 1967 as the second production six-cylinder DBS before going on to spearhead development of the V8-engined version. A full description of this historically important Aston Martin is detailed below.At the request of its current owner in 2014, Aston Workshop completely renewed all rubbers, suspension bushes, and engine mounts to sharpen up the handling and steering responses, and changed the tyres to more appropriate 215-width Avon radials. During this work, the fuel tank was also re-built, seats re-filled and later the steering wheel replaced with a reliable all-steel original design. Interviewed for an article in Vantage magazine (Autumn 2014 edition, copy on file) the owner expressed his delight with the results: “I was thrilled to find the car was completely transformed. It seems smaller, easier to place on the road, and that V8 grunt is fantastic!”Since acquisition, the complex original fuel-injection has been rebuilt and the clutch renewed (photographs and invoices on file) but apart from that and a previous re-spray back to Dubonnet Red, this unique car is described as un-restored and superbly preserved.“DBS/5002/R' is many things…” declared Vantage in conclusion. “…Intriguing, mysterious, charismatic and compelling, and a small yet significant piece of Aston Martin history.” Detailed history of this significant Aston Martin:Although always intended to house the new Tadek Marek-designed V8, the DBS first appeared with the 4.0-litre six of the concurrently produced DB6. Styled in-house by William Towns, the four-seater DBS abandoned the curvy lines of the earlier Touring, touring-styled DB models in favour of a sharper, hard-edged look in the modern idiom. The new car employed a platform-type chassis with independent suspension all round: wishbone and coil-spring at the front, De Dion with Watts linkage at the rear. Bigger and more luxuriously appointed than the DB6, the heavier DBS disappointed some by virtue of its slightly reduced performance, but there were no complaints when the V8 arrived in 1969. With an estimated 345bhp available from its 5,340cc, Bosch fuel-injected, four-cam motor, the DBS V8 could reach 100mph in under 14 seconds, running on to a top speed of 160mph - a staggering performance achievement in those days and one which fully justified the claim that it was the fastest production car in the world. Even in automatic transmission form the V8 could reach 100mph in around 15 seconds and better 145mph flat-out.Retained by the factory for development purposes, '5002/R' was originally fitted with six-cylinder engine number '400/3269/SVC' (a Vantage unit) and first registered as 'BPP 6F', as seen in many press articles at the time. The original colour scheme was Dubonnet with natural hide interior, the exterior colour being changed to yellow at a later date. Aston Martin's first attempt at a V8 was a 5.0-litre unit, as raced by Lola at Le Mans, and '5002/R' was initially fitted with one of these before it was replaced with one of the more reliable 5.3-litre production engines: 'V/540/278', which had been taken from another of the development cars.High-speed testing on the Continent was undertaken to improve stability at the higher speeds the V8 was capable of, during which it was found that wire wheels were not up to the task, hence the switch to alloy wheels for the production DBS V8. In its edition ofthe 2nd October 1969 edition of, Autocar, they published a technical analysis of the new DBS V8, headed by a photograph of 'BPP 6F', probably supplied by the factory.The accompanying (copy) guarantee form lists the Agent as 'Aston Martin Lagonda Limited' and the Purchaser as 'Sales Department Demonstration Vehicle', while still quoting the number of the original six-cylinder engine. It notes that the car was equipped with the Vantage engine ('400/3269/SVC'), Motorola radio, seat belt anchorage points, and power assisted steering. The DBS was passed to Sales on 14th June 1968, while the old-style V5 registration document gives the date of first registration as 6th March 1968. Only one owner is listed on the guarantee form: R Smith Esq of Ravenstone, Buckinghamshire.Nowadays it is unthinkable that a non type-approved development car would be sold off to the trade, but things were more relaxed 50 years ago and the permanently cash-strapped Aston Martin would have been reluctant to forgo the profit resulting from such sales, hence the survival of many of these intriguing 'one-offs'.In 1978, by which time it had been reregistered as '222 HOH', '5002/R' was owned by Mr Frederick Stewart Bond of Fulwood, Preston, who had acquired it on 7th September of that year (copy V5 on file). In 1979, the Aston was offered for sale at auction, described as 'used by the factory as a development car, and... originally fitted with a six-cylinder engine'. It was also said to retain some special features, the most obvious being the extra bonnet vents. Sold at the auction for £4,900, the this DBS V8 prototype passed into the ownership of Mr Anthony Hall-Griffin of Balsall Common, Coventry (copy V5 on file). The car remained in Mr Hall-Griffin's ownership for the next 35 years until it was purchased in April 2014 via renowned marque specialists, Aston Workshop, by for the current vendor, a prominent Aston Martin collector based in the Netherlands. The sales invoice is available, and the accompanying history file also contains the aforementioned copies of the registration and factory records, assorted items of correspondence, sundry invoices, a quantity of expired tax discs and MoTs, a UK V5C Registration Certificate, and various other historical documents. View this lot in our showroom and marquee preview day Friday 5th July 2019, Beamish, County Durham
Auction Details
Shipping
T&Cs & Important Info
Ask seller a question
This stunning Aston Martin DBS Prototype represents one of the most important milestones in Aston Martin history: the commencement of the V8 generation. Not only that, but '5002/R' started life in the autumn of 1967 as the second production six-cylinder DBS before going on to spearhead development of the V8-engined version. A full description of this historically important Aston Martin is detailed below.At the request of its current owner in 2014, Aston Workshop completely renewed all rubbers, suspension bushes, and engine mounts to sharpen up the handling and steering responses, and changed the tyres to more appropriate 215-width Avon radials. During this work, the fuel tank was also re-built, seats re-filled and later the steering wheel replaced with a reliable all-steel original design. Interviewed for an article in Vantage magazine (Autumn 2014 edition, copy on file) the owner expressed his delight with the results: “I was thrilled to find the car was completely transformed. It seems smaller, easier to place on the road, and that V8 grunt is fantastic!”Since acquisition, the complex original fuel-injection has been rebuilt and the clutch renewed (photographs and invoices on file) but apart from that and a previous re-spray back to Dubonnet Red, this unique car is described as un-restored and superbly preserved.“DBS/5002/R' is many things…” declared Vantage in conclusion. “…Intriguing, mysterious, charismatic and compelling, and a small yet significant piece of Aston Martin history.” Detailed history of this significant Aston Martin:Although always intended to house the new Tadek Marek-designed V8, the DBS first appeared with the 4.0-litre six of the concurrently produced DB6. Styled in-house by William Towns, the four-seater DBS abandoned the curvy lines of the earlier Touring, touring-styled DB models in favour of a sharper, hard-edged look in the modern idiom. The new car employed a platform-type chassis with independent suspension all round: wishbone and coil-spring at the front, De Dion with Watts linkage at the rear. Bigger and more luxuriously appointed than the DB6, the heavier DBS disappointed some by virtue of its slightly reduced performance, but there were no complaints when the V8 arrived in 1969. With an estimated 345bhp available from its 5,340cc, Bosch fuel-injected, four-cam motor, the DBS V8 could reach 100mph in under 14 seconds, running on to a top speed of 160mph - a staggering performance achievement in those days and one which fully justified the claim that it was the fastest production car in the world. Even in automatic transmission form the V8 could reach 100mph in around 15 seconds and better 145mph flat-out.Retained by the factory for development purposes, '5002/R' was originally fitted with six-cylinder engine number '400/3269/SVC' (a Vantage unit) and first registered as 'BPP 6F', as seen in many press articles at the time. The original colour scheme was Dubonnet with natural hide interior, the exterior colour being changed to yellow at a later date. Aston Martin's first attempt at a V8 was a 5.0-litre unit, as raced by Lola at Le Mans, and '5002/R' was initially fitted with one of these before it was replaced with one of the more reliable 5.3-litre production engines: 'V/540/278', which had been taken from another of the development cars.High-speed testing on the Continent was undertaken to improve stability at the higher speeds the V8 was capable of, during which it was found that wire wheels were not up to the task, hence the switch to alloy wheels for the production DBS V8. In its edition ofthe 2nd October 1969 edition of, Autocar, they published a technical analysis of the new DBS V8, headed by a photograph of 'BPP 6F', probably supplied by the factory.The accompanying (copy) guarantee form lists the Agent as 'Aston Martin Lagonda Limited' and the Purchaser as 'Sales Department Demonstration Vehicle', while still quoting the number of the original six-cylinder engine. It notes that the car was equipped with the Vantage engine ('400/3269/SVC'), Motorola radio, seat belt anchorage points, and power assisted steering. The DBS was passed to Sales on 14th June 1968, while the old-style V5 registration document gives the date of first registration as 6th March 1968. Only one owner is listed on the guarantee form: R Smith Esq of Ravenstone, Buckinghamshire.Nowadays it is unthinkable that a non type-approved development car would be sold off to the trade, but things were more relaxed 50 years ago and the permanently cash-strapped Aston Martin would have been reluctant to forgo the profit resulting from such sales, hence the survival of many of these intriguing 'one-offs'.In 1978, by which time it had been reregistered as '222 HOH', '5002/R' was owned by Mr Frederick Stewart Bond of Fulwood, Preston, who had acquired it on 7th September of that year (copy V5 on file). In 1979, the Aston was offered for sale at auction, described as 'used by the factory as a development car, and... originally fitted with a six-cylinder engine'. It was also said to retain some special features, the most obvious being the extra bonnet vents. Sold at the auction for £4,900, the this DBS V8 prototype passed into the ownership of Mr Anthony Hall-Griffin of Balsall Common, Coventry (copy V5 on file). The car remained in Mr Hall-Griffin's ownership for the next 35 years until it was purchased in April 2014 via renowned marque specialists, Aston Workshop, by for the current vendor, a prominent Aston Martin collector based in the Netherlands. The sales invoice is available, and the accompanying history file also contains the aforementioned copies of the registration and factory records, assorted items of correspondence, sundry invoices, a quantity of expired tax discs and MoTs, a UK V5C Registration Certificate, and various other historical documents. View this lot in our showroom and marquee preview day Friday 5th July 2019, Beamish, County Durham
Beamish Auction July 2019
Sale Date(s)
Venue Address
Aston Workshop Ltd
Red Row
Stanley
DH9 0RW
United Kingdom
For Beamish Auctions delivery information please telephone +44 (0) 1207 233 525.
Important Information
.
Terms & Conditions
Beamish Auctions – GNCCS 2019 Terms and Conditions
Sellers Terms and Conditions
There is no entry fee for car or motorcycle consignments. Should your entry sell at auction, we will charge our standard seller's commission of 5%+VAT based on the hammer price your entry has achieved. The sales commission will be deducted from the hammer price (if the reserve is met), with the remainder being paid to the seller.
Sellers can specify a fixed reserve. We do not make discretionary changes to reserves on sale day under any circumstances without the sellers prior consent.
Proceeds of your sold consignment will be paid to the seller within a maximum of 5 working days after we have received the full purchase price from the buyer. We will settle with you the amount of the hammer price less any outstanding charges (including transport, sales commission fees and VAT as previously agreed).
Buyers Terms and Conditions
All purchases are subject to a buyers premium of 15% + VAT at the current rate
The purchasers of all lots under £1000 hammer price must pay for the item in full by the end of the sale day and before the lot can be removed unless alternative arrangements are made in advance
The purchasers of all lots over £1000 hammer price must pay a minimum £500 deposit towards the item by the end of the sale day. The remaining amount will be due within 5 working days of the end of the auction. No lots will be released until cleared funds are received in full.
Payments are accepted by debit card or bank transfer only.
Fees – A Worked Example
For example a winning bid at the fall of the hammer of £10,000 would lead to a final bill of for the purchaser of £11800 including VAT (£10000+[£1500 +£300 VAT])
The seller, having enjoyed free entry of their lot into the auction, would be returned a total of £9400. This is the £10000 hammer price less 5% + VAT, (£10000 - [£500+£100 VAT])
Bidding
Bidder registration is required prior to the start of the auction. You can bid at auction either in person by attending the sale, by telephone, by leaving an absentee bid or live, online.
To bid in person prior to the sale you will be assigned a paddle number that you will be able to use on the day
If you are unable to attend the auction on sale day, telephone bidding will still allow you to bid in real time. On the day of the sale, a member of Beamish Auctions will contact you, usually a few lots prior to your selected lots and will guide you through the process. To register a telephone bid, please contact us a minimum of 48 hours in advance. It is important that you provide us with alternative contact numbers to ensure that we are able to contact you on the day. If, for any reason, we are unable to contact you any of the telephone numbers you submitted, you may wish to enter a "covering" commission bid, this however is entirely optional.
If you are not be contactable on the day of the sale, you may leave with us an absentee commission bid. Please contact us for each lot you wish to bid on, stating the maximum amount you are willing to bid up to (excluding buyer's premium and VAT). We will execute your bid as low as possible on your behalf up to the agreed maximum amount
Online live bidding is available using the website www.i-bidder.com.
The link below can be used for bidder registration.
https://www.i-bidder.com/en-gb/my-account/register
The link below shows our auctions
https://www.i-bidder.com/en-gb/auction-catalogues/beamishauctions
When placing online bids please make sure that you allow plenty of time for the auctioneer to register your bid.
General Terms and Conditions
All purchases are sold strictly as seen. No warranty is given or implied, and these lots are sold purely as collector's items and not as road legal means of transportation.
Vehicle Identity and History
All vehicles being presented for sale by Beamish Auction are done so with the understanding that the vehicles are collectibles. Their primary function is not for transportation and potential bidders should be aware that the condition and presentation of each vehicle is based on information provided by the seller. It is the sole responsibility of the potential buyer to conduct an inspection of both the vehicle and any corresponding documentation for validation prior to the day of auction.
Documentation
A reminder to all bidders to check and validate any documentation being provided with lots. Any existing paperwork may not be automatically transferred to a new owner so it is the responsibility of each bidder to insure the validity of any documentation and position presented with any lot.
Warranty
Beamish Auction acts solely on behalf of the Seller to offer his lot for sale by auction. As such, we do not offer any warranty or guarantee as to the condition of the lot including road worthiness, mechanical fitness and/or accuracy of information provided by the Seller. It is the responsibility of the buyer to inspect and conduct due diligence prior to the day of the auction.
Insurance
Vehicles are insured prior to and during the sale of the auction by Beamish Auction. Once the hammer falls, it is the responsibility of the new owner to immediately arrange appropriate insurance for the vehicle.
The auctioneers reserve the right to refuse admission to, or eject from, the saleroom any persons without giving any prior warning or explanation.
All successful purchases for which full payment has been received must be removed from the auction hall by 17.30 Hrs on the sale day Saturday 06/07/2019. By agreement successful purchases may be removed from the auction venue during normal office hours by 17.30 Hrs Monday 08/07/2019. Any item not so removed will be taken into store by the auctioneer at no charge for up to 28 days once payment is received. Any storage in excess of this figure will be charged to the purchaser at a rate of £50 + vat per day unless other specific arrangements or agreements have been made prior to, or on the sale day. The same applies to any unsold lots.
This is a Sale by Auction under English Law and is subject to the laws which govern such sales.
Your attention is drawn to the following conditions which will apply specifically to any sale conducted by the auctioneers: Lots are available for inspection and will be sold as seen.
Every effort is made to ensure that any description given is true and accurate based on information provided by the consignor of the lot, but descriptions are not guaranteed to be accurate.
The auctioneer is acting solely as agent for the consignor.
No bid will be accepted unless the bidder has registered with the auctioneer prior to the sale and has provided satisfactory evidence of identity and means of payment. (Driving licence, bank card, letter of credit or banking reference etc.).
All lots must be paid for in full before the lot can be removed.
Payments are accepted by debit card or bank transfer only.
Any lots requiring delivery will be charged at the buyer’s cost. Quotations available upon request
A sale is concluded at the fall of the hammer and the auctioneer reserves the right to withdraw any lot at any time prior to the fall of the hammer without giving any reason. The auctioneer also reserves the right to bid on any lot up to the reserve on such lot.
In the event of a disputed bid, the auctioneer reserves the right to re-open the bidding and to determine at what price it shall re-start.
