Emile Margot Rotary Screen Pre-Cleaner, serial no. 103 11 78, with spare screens, approx. overall size 4m x 1.7m x 3m high, purchaser responsible...

Four Belt & Bucket Elevators, mainly 280mm wide on leg section, dimensions approx. 40ft (high), purchaser responsible to dismantle and load howeve...

Two x Six Compartment Crittall Bolted Sectional Profiled Galvanised Steel Grain Storage Bins, each cell approx 3m long x 3m x 8m deep, capacity 50...

Carier Chain & Flight Cross Conveyers (floor level between grain storage bins), approx. 20m, purchaser responsible to dismantle and load however v...

Two Carier Chain & Flight Cross Conveyers (over grain storage bins), 175mm & 125mm across casings, approx. 23m & 8.5m long, purchaser responsible ...

Welded Steel Fuel Oil Horizontal Storage Tank, 4.5m long x 1.8m dia, purchaser responsible to dismantle and load however vendor will make telehand...

Galvanised Steel Electric Lift Roller Shutter Door, approx. 3.6m wide x 6.8m high, purchaser responsible to dismantle and load however vendor will...

Approx. 120mm dia, Inclined Auger Conveyor, approx 6m long,  purchaser responsible to dismantle and load however vendor will make telehandler avai...

Approx. 150mm dia, Galvanised Steel Cased Inclined Auger Conveyor, approx 9m long,  purchaser responsible to dismantle and load however vendor wil...

Brice Baker Approx. 150mm dia, Inclined Auger Conveyor, approx 5m long,  purchaser responsible to dismantle and load however vendor will make tele...

Approx. 200mm dia, Inclined Auger Conveyor, approx 6m long,  purchaser responsible to dismantle and load however vendor will make telehandler avai...

Approx. 120mm dia, Inclined Auger Conveyor, approx 7.7m long,  purchaser responsible to dismantle and load however vendor will make telehandler av...

Approx. 120mm dia, Inclined Auger Conveyor, approx 6m long,  purchaser responsible to dismantle and load however vendor will make telehandler avai...

Simon Barron Cooler, with shaker, 1.1kW, approx. 1.5m wide x 2.5m long, 820mm exit height, 1.1m wide shaker bed, 3.18m high, 860mm hopper height, ...

Fan Cyclone, 15kw, approx. 1.3m long, loading free of charge - yes, item located in Blairgowrie, Perth Please read the following important notes:...

Cyclone, approx. 1.6m upper height x 1.3m dia., 500mm top inlet, lower seal 1.34m wide x 1.8m long x 3.08m high, with 0.37kW electric motor, loadi...

Conveyor, 0.55kW, approx. 860mm inlet height, 290mm wide belt, 2.35m exit height, loading free of charge - yes, item located in Blairgowrie, Perth...

Meincke TURBU FOUR ZONE GAS FIRED TUNNEL BISCUIT BAKING OVEN, (main image from archives of similar oven) overall size approx. 32m long, with contr...

330mm wide Cleated Belt Inclined Conveyor, approx. 3.75m centres long, with drum drive and two steel stands. Lot located at Spilsby Road, Boston, ...

Assorted Hand Rails, as set out on pallet. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.angel,  Loadin...

PART STAINLESS STEEL TWIN SHAFT DOUBLE Z BLADE TILTING MIXER, approx. 900mm x 940mm x 800mm deep, with 11kW electric motor drive (steel sides). Lo...

Haven Inclined Trough Belt Conveyor (no belt), 500mm wide on rollers x 4.8m, with geared electric motor drive. Lot located at Spilsby Road, Boston...

Trough Belt Conveyor Section (incomplete), approx. 530mm wide on roller, approx. 5m long on casing, with geared electric motor drive (no tail end)...

Dough Feeding Conveyors & Equipment for Bepex machine, as set out, approx. 750mm wide on belt. Lot located at Spilsby Road, Boston, PE22 8JT. w3w ...

APPROX. 35 DOG BISCUIT ROLLER FORM CYLINDERS, mainly understood to be phospher bronze or brass or plastic outer shells, 1040mm, 800mm, 830mm, 1020...

Assorted Rolling & Forming Rolls, as set out in three plastic boxes. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/lo...

Hutt Hosokawa Bepex MS 800 ES/TB GUILLOTINE, machine no. 51 954, year of manufacture 1997. Lot located at Spilsby Road, Boston, PE22 8JT. w3w loca...

Hutt Hosokawa Bepex FP 200-800 MARROW BONE CO EXTRUSION MACHINE, serial no. 51952, year of manufacture 1997, fitted 600mm wide rolls, with extra 8...

Rapidor Manchester Metal Hacksaw, with electric motor drive. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.bi...

Gyde Thomsen GB-113-60-320 THREE SECTION FLAT BELT CONVEYOR, (no belt), approx. 370mm wide on rollers, 300mm wide on conveyor walling, one section...

Stainless Steel Hopper with Belt Discharge Hopper, approx. 750mm wide on belt x 2.1m centres long, with pneumatic ram lift discharge gate. Lot loc...

Richard Simon 36lb/ 112lb Sack Packing Weigher, with sack clamp and steel stand. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https...

Welded Steel Hopper, approx. 1.25m x 780mm x 1.1m deep. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.a...

800mm wide Gauge Roller, with infeed belt conveyor. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.angel...

Loose Contents of Three Box Pallets (BOX PALLETS EXCLUDED), including boot stands, steel framed bench with sample grinder, clipboard stands and eq...

Omag CEL 104 1050mm x 4mm HYDRAULIC SHEER GUILLOTINE, serial no. 55 0591. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w....

800mm wide Gauge Roller, with infeed belt conveyor. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.angel...

Two Cylinder Air Compressor, with electric motor drive and vertical welded steel air receiver. Lot located at Spilsby Road, Boston, PE22 8JT. w3w ...

Blowline Radius Sections and Conveyor Casings, on pallet. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds...

Centrifugal Fan, with electric motor drive. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.angel,  Loadi...

Geared Motor Driven Rotary Air Seal, approx. 190mm x 190mm intake, with variable speed geared electric motor drive unit, on one pallet. Lot locate...

Assorted Ducting, as set out in one area. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.angel,  Loading...

400mm wide Roller Conveyor, approx. 2m long. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.angel,  Load...

800mm wide Gauge Roller, with infeed belt conveyor. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.angel...

Belt Conveyor, with mesh belt drive unit, in one stack. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.a...

Conveyor Bridge, approx. 1.3m x 1.5m high. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds.angel,  Loadin...

Chain Drive Unit, approx. 900mm wide on drive sprockets. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/logbook.birds....

Mobile Roll A Frame Double Side Roll Rack, to accept rolls up to 1.24m wide. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https:/...

Mobile Double Sided Two Tier Roll Rack, to accept rolls up to 1m wide. Lot located at Spilsby Road, Boston, PE22 8JT. w3w location https://w3w.co/...

Rotary Biscuit Moulder, 840mm wide on roll, as fitted with infeed conveyor and die as fitted. Lot located at Spilsby Road, Boston, PE22 8JT. w3w l...

Jonge Poerink Radius Belt Conveyor, approx. 900mm wide on belt, with electric motor drive. Lot located at Spilsby Road, Boston, PE22 8JT. w3w loca...

Ciba AVER6  AO6 Cartoning & Filling Machine, serial number 05400408.Vendors comments - Range Face width 135-235mm, Depth 50-70mm, Height 200-295mm...

Lightnin HQ400VH Variable Speed Motor & Gearbox (no shaft or impeller), serial no 061176/1, year of manufacture 1995, free loading onto purchasers...

Wurschum VH-150 Manual Filling Machine (stainless steel bench top paste and cream filler variable fill), serial no 0410-6646, year of manufacture ...

Alfa-Laval Stainless Steel Frame 1m Conveyor, flat belt 100 mm wide geared drive and control switch, year of manufacture, dimensions approx. 1m x ...

Transorm Systems Stainless Steel 1200mm dia. V/S Table, with ABB starter/ emergency stop, free loading onto purchasers transport - Yes, item locat...

Piab Stainless Steel Vacuum Conveyor, free loading onto purchasers transport - Yes, item located in Darlington, Durham, vendors comments/condition...

Dalton Stainless Steel 20L Twin Arm Mixer (for pastes), with controls, free loading onto purchasers transport - Yes, item located in Darlington, D...

Euromixers Ltd Stainless Steel IBC Mixer (which is air driven and has fork lift lugs), year of manufacture 2009, capacity 1000L, free loading onto...

Supertaper Stainless Steel Box Taper (in construction it will tape wide and tall boxes/ cartons both top and bottom tapers), on wheels, free loadi...