Siemens TWIN-CA36 STEAM TURBINE, serial no. 4.736.023, year of manufacture 2008, output 3119kW (norm.) 3326kW (max.), at 1500rpm, with electro-hyd...

Indar BZKL-630-L/4 3750kVA AC GENERATOR, serial no. 70001147, year of manufacture 2009, 1500rpm, 11,000V, 50Hz (cable excluded), with two coolant ...

Three Door Control Panel, for turbine and generator (please note this lot is part of combination lot 3)Please read the following important notes:-...

COMBINATION LOT – LOTS 1, 2 AND 2A OFFERED FOR SALE AS A ONE LOT CONTRACT (please note the final highest bid on this lot will only be accepted if ...

Serck Como Hamworthy STEAM CONDENSER, serial no. 24087, year of manufacture 2007, approx. 1.1m dia., approx. 7.4m long, with two multistage pumps,...

Gestre FlowServe FEED WATER VESSEL, serial no. 741493, type SW 06, year of manufacture 2008, 6,000 litre volume, approx. 1.75m dia. x 3.6m long, w...

KSB MIC/D 50/15-031.2062 Pump, serial no. 99/1326306/000500, 20.95m³/h, year of manufacture 2008, with ABB 75kW electric motor, 2978rpm, with imme...

KSB MLC1 50/15-03 Pump, serial no. 9971326288/000500/02, 20.95m³/h, year of manufacture 2008, with ABB 75kW electric motor, 2978rpm, with immediat...

TWO Greens SUPER HEATERS, serial no. OVL7202A-A and OVL7202A-B, each year of manufacture 2021, 202 litres volume, test date 2021, design temperatu...

BIB Cochran WASTE HEAT UNIT, serial no. 99/4618, 15149kW max. heat output, year of manufacture 2008, max. allowable temperature 260°C, with Greens...

BIB Cochran ECONOMISER, serial no. 27/4621, year of manufacture 2008, max. allowable temperature 350°C, 2561kW max. heat output, with ducting to c...

Bio Flame Designed CERAMIC LINED FURNACE CHAMBER, approx. 3.5m x 3.5m x 4.2m deep, with control panel, discharge conveyor (note – no burner), two ...

Bio Flame Designed CERAMIC LINED FURNACE CHAMBER, approx. 3.5m x 3.5m x 4.2m deep, with control panel, discharge conveyor (note – no burner), two ...

Seven Door Control Panel (in Control Room)Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At...

Welded Steel Furnace Distribution Hopper Feed Unit, approx. 2.9m dia. x 1.5m deep, with four discharge screw conveyors (excluding circular dischar...

Stainless Steel Fume Extraction Ducting, from two way union to chimney stack (excluding centrifugal fans), with stainless steel standPlease read t...

TWIN CHAIN & 350MM WIDE SCRAPER ASH DISCHARGE CONVEYOR, approx. 16.6m long, with geared electric motor drivePlease read the following important no...

TWO CYCLONE RECEIVERS, each with tote bag discharge frame, hand operated slide, bolted steel stand (to both cyclones) and ducting to and including...

Mikropul Nederman DUST COLLECTION UNIT, understood to be type FS722/3.25/455 (231), understood to be year 2005, with ducting (from first bend on c...

Dantherm FS722/3.25/455(231) DUST COLLECTION UNIT, project item 180265/58702800, year of manufacture 2005, volume 30,000m³/h h I.B., 2008 with 110...

BOLTED SECTIONAL STEEL CHIMNEY STACK, approx. 1.2m dia., understood to have a height of 18m (stack monitoring sensors etc excluded - see lot 58)Pl...

Durag DUST ANALYSER SENSORS, vendors comments  The Durag recently fitted was their most up to date model D-R 808 complete with all relevant M-cert...

Hadron Engineering SR015/42/3 Blower Unit, serial no. 0874, year of manufacture 2010 (Blower No. 2)Please read the following important notes:- ***...

Haydon Engineering SR015/42/3 Blower Unit, serial no. 0807, year of manufacture 2010 (Blower No. 1)Please read the following important notes:- ***...

Ian Flockton GRP/Plastic Sheeted Water Tank, approx. 3.5m dia. x 3.3m deepPlease read the following important notes:- ***Overseas buyers - All lot...

Two Centrifugal Water Pumps, each with electric motor drivePlease read the following important notes:- ***Overseas buyers - All lots are sold Ex W...

Four Water Treatment VesselsPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close of ...

AWE UO2000 ND Reverse Osmosis Plant, production no. 805703-1, year of production 2008, 3kW, 2000 l/h max. permeate flow rate, with vertical pumpPl...

30,000 litre Plastic Water Tank, approx. 3m dia. x 5.3m highPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex ...

Two Urea Pumps, with steel base platePlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the ...

IQR FH1200 WOOD SHREDDER, serial no. 1022, year of manufacture 2006, with electric motor drive, electro-hydraulic power pack, control panel, contr...

Approx. 950mm wide Inclined Belt Conveyor, approx. 19m centres long, with five steel supports and discharge chutePlease read the following importa...

Assorted Shredder Spares, as set out in one areaPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*...

Saxlund FOUR TRACK WALKING LADDER PUSH FLOOR INTAKE, ladders approx. 6m wide x 20m long, with levelling auger, discharge twin chain and scraper co...

Tramco Chain & Flight Conveyor, approx. 7m centres long, with geared electric motor drive and one discharge outletPlease read the following import...

Tramco Inclined Chain & Flight Conveyor, approx. 600mm wide on casing, approx. 15m centres long, with geared electric motor drive and one discharg...

Bolted Sectional Steel Cyclone Receiver Unit, 2.4m dia., approx. 6.5m high, with ducting to fan, hooped steel access ladder and ducting to interna...

Steel Cased Centrifugal Fan, approx. 450mm dia. intake, approx. 350mm x 600mm delivery, with 37kW electric motor, 1475rpm, extended spindle and ga...

Spent Lime Storage Silo, approx. 18 tonne cap., approx. 3m dia. x approx. 7.6m deep overall, with discharge auger, four loadcells and WAM dust ven...

Lime Storage Bin, with blowline intake, two discharge augers, venting unit to top, hooped steel access ladder, bridge platform to adjoining silo, ...

Atlas Copco GA11VSD+FF PACKAGED AIR COMPRESSOR, serial no. AP1263291, year of manufacture 2017, indicated running hours 29045 (at time of listing)...

Power Generation C500D5 450kVA DIESEL ENGINE STANDBY GENERATOR, serial no. A05K530980, year of manufacture 2005,  with Cummins diesel engine, cont...

Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...

Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...

Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...

Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...

Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...

Two Universal Heat Transfer Ten Fan Liquid Cooling Units, with fabricated steel support stand, each pair overall size approx. 5m x 8.8m x 2.9m hig...

Bunded Steel Storage Tank, overall tank size approx. 3.5m x 1.5m x 2m deep, with delivery pump, meter and hose in steel housing to onePlease read ...

Flamco Expansion Vessel, approx. 800mm x 700mm deepPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EX...

Turners SEB 5448 litre cap. Bunded Storage Tank, serial no. 12211, year of manufacture 2015, 3.2m x 1.24m x 1.5m deep, with two pumps as fittedPle...

FlowServe Blow Down Vessel, serial no. 11523, year of manufacture 2009, 4.81m³ cap, approx. 1.6m dia. x 1.1m deep, with immediate valves and pipin...

Cyclone Receiver, with geared motor driven rotary air seal and steel framePlease read the following important notes:- ***Overseas buyers - All lot...

Geared Motor Driven Rotary Air (understood to be unused), with intake approx. 400mm x 220mmPlease read the following important notes:- ***Overseas...

Hydrovane Horizontal Receiver Mounted Air Compressor, model 502C10-201, serial no. 502-033266-1805 three phasePlease read the following important ...

Single Door Steel Control PanelPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close ...

Lime Silo Control CabinetPlease read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** At the close of the...

Worthington Creyssensac Rollair 1500 Packaged Air Compressor 3,892 hours (at time of listing) (no. 1)Please read the following important notes:- *...

Worthington Creyssensac Rollair 1500 Packaged Air Compressor, 8,010 hours (at time of listing) (no. 2)Please read the following important notes:- ...

JED Type R500 11Y 500 litre Vertical Welded Steel Air Receiver, serial no. 15515684, year of manufacture 2010Please read the following important n...