Wadkin SR Rip Saw, The machine has been stripped, resprayed in Wadkin green, new belts and blade shaft bearings x2. Fitted with a 24” diameter tct...

Large Industrial Extractor fan DCE Unimaster, UMA 104/g3 fine dust Extractor with filters and auto shaker. 3 phase. 2hp. Appraisal: Used Model/Ser...

Wadkin DM Morticer with Guard, 3 phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collec...

Centauro T4 1600 Lathe, This machine has been cleaned, Resprayed in original green, Greased and Tested Appraisal: Used Model/Serial No: Hours/Mil...

Wadkin BEL Spindle Moulder, 3 phase industrial machine with plug for power feed. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-O...

Wadkin EOT Up Stroking Circular Truss Saw, This machine is complete with in and out feed rollers, The machine turns effortlessly to adjust angle o...

Wadkin MZF Bandsaw, This has been stripped resprayed in Wadkin green and rebuilt. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-...

Wadkin Robinson ST Automatic Double Stair Trencher 12 x 4, (DOES NOT HAVE ROLLER TABLES), 3 Phase. Appraisal: Used Model/Serial No: Hours/Miles: ...

Lamont Pneumatic Kitchen Door Clamp. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collectio...

Containerised Heating Plant, (2011) including: Hamworthy Melbury 700kw dual fuel boiler with Reilo Burner and Hamworthy Wessex 250kw gas boiler un...

Rojek MSP310M Planer Thicknesser with a planing capacity of 310mm. Year of manufacture 2007, 2.2kw 3 phase electrics. Appraisal: Used Model/Serial...

Sedgwick TA400 Rip Saw, 3 Phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collection: W...

Wadkin AGS12 Saw with Rip Fence Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collection: Wi...

M & A, Mecanica & Automazioni, Model Znina Intestatrice, 1.5kw 3 phase. YOM 2001. Stacked tooling included. Appraisal: Used Model/Serial No: Hour...

Suntom SDE 6500T Diesel Generator with 110 and 240v outlets. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By app...

Wadkin PP Dimension Saw complete with rare compound mitre fence. Sliding table, large 18” 450mm blade. Solid cast construction with micro switch f...

Wadkin BT630 Thicknesser with built on overhead grinder, Just had a respray with Wadkin Paint, 3 phase electrics. 5.5kw. Appraisal: Used Model/Ser...

Palmatic PL200-1700 Vacuum Lift, Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collection: ...

Sicar Wide belt linishing Sander 3000mm table with power rise and fall. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye View...

SCM S52 Thicknesser, 4 knife block, Power rise and fall, Digital readout. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Vi...

Wadkin JV Double 30” disc sander complete with rare setting stand Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: B...

CRM 35 Profile and Straight knife Grinder Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Coll...

Omga 350mm Diameter Blade Cross Cut Saw, Starter was taken off for another machine so requires electric starting box, sold as spare repair can you...

Upstroking Crosscut Saw, 3 Phase Electrics. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Co...

Flamefast DS300 Brazing Hearth and a Flamefast DS320 Forge with torches. It came out of a College workshop years ago and not used since Appraisal:...

Wadkin SP12 Panel Saw, New main motor bearings, new table roller bearings throughout, new belts fitted. Appraisal: Used Model/Serial No: Hours/Mi...

Powrmatic CPXO 150UF Space Heater, 150kw Output, Runs on oil and 3 phase for the 2.2kw fan blower, Stainless Steel Chambers, Top 4 air vent direct...

Bauer S260 Metal Auto Saw, 3 Phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only ...

Wema Joker 2000 Copy Lathe Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collection: Within ...

Busellato Jet 260 CNC Router, YOM 2004, sold as scrap/ spare/ repair, Main Router head and controller not present. Appraisal: Used Model/Serial N...

Startrite 316 H Large Vertical Metal Cutting Bandsaw, Could be used for other material with suitable blade. Support extension table come with the ...

Wadkin BAOS12 Planer Thicknesser, 12” 310mm capacity, 3 phase, Stripped, Shot blasted, Polished, Cleaned, New bearings, Belts, Motors checked, Dc ...

Maggie 21 Prestige Mutiboring Machine, Used for speed drilling production in furniture board production, Pin and cam, Dowel drilling and Hinge bor...

Hammer N4300 Bandsaw, 3 Phase, 2kw, 310mm Depth maximum. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appoint...

TT-133 is a pressurized water temperature control unit for use with water temperatures up to 140°C. During operational use, the TT-133 can accommo...

SCM T110 Heavy Duty Spindle Moulder. The Shaft on this machine is 1 1/4" Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On...

Pair of Hoffmann PU-2 Machines, Sold as Spares or Repairs. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appoi...

Wadkin BEM Spindle Moulder, 1 1/4" spindle diameter, 430mm max diameter tooling approx, Steff 2034 power feed. Appraisal: Used Model/Serial No: H...

Wadkin FSP Four Sided Planer, This machine has had new bearings and new universal joints fitted, Complete with cutter blocks fitted. Appraisal: Us...

JKO SVT90 Veneer and Laminate Trimmer, No overhead power feed. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye View...

Sagar 16" Surface Jointer Planer Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collection: W...

Sedgwick 2 Head Tenoner with modern top and bottom tenon blocks supplies, Replaceable cutters and scribes, This is a nut and bolt strip, undercoat...

Interwood Overhead Router, British built, heavy duty with frequency changer, 3 phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ro...

Weinig 929 Grinder, Suitable for straight knife grinding whilst knives are still in the block also suitable for profile grinding. Appraisal: Used ...

Wadkin DM A Hollow Chisel Morticer, 3 Phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only C...

Sudhoff Hot Air Edgebander, Hot air pre heats the pre glued tape from the coil applies pressure to glue it to the panel, Top and bottom trimmer ro...

Wadkin UX Overhead Router with frequency changer. British built, Heavy duty, 3 phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ro...

large Industrial Extractor Fan with 22kw motor year of manufacture 2012, 170cm long, 155cm wide, 140cm tall, Fan diameter approx 55cm x 23cm wide,...

Wadkin 16" Surface Planer Jointer, 3 Phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Co...

Industrial Extractor Fan manufactured by JHM, Motor is 15kw, 150cm long, 100cm wide, 134cm tall, Fan diameter approx 45 x 13.5cm wide, 50 Hz, 262...

SCM Compact 23K Four Sided Planer, 230 finished material width. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By ...

Herbert no.2 Flashtap Pedestal Tapping Machine, Table size 10 x 10 inch, Throat 6.5 inch with foot control and box of gears. Appraisal: Used Model...

Saomad 4 Head Tenoner, The DC brake units have been removed, 3 Phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewin...

Wilson 5 Head Tenoner, 3 Phase, 1 x cut off saw, 2 x scribing heads top and bottom, 2 x tenoning heads top and bottom. Appraisal: Used Model/Seria...

SKF Inspector 400 Ultrasonic Probe, model CMIN400, This comes in original carry case with probe, Headset 3 extension bars, User manual and documen...

Sedgwick Spindle Moulder, 3 Phase Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collection: ...

Wadkin EQ Spindle Moulder, 3 Phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only Collection...

Rye HFB300 Edgebander, The Edgebander will do straight or curved applications. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-W...

Danckaert 16" Surface Jointer Planer, 3 Phase. Appraisal: Used Model/Serial No: Hours/Miles: Location: Ross-On-Wye Viewing: By appointment only ...

Holzmann VS25/5PM Five Head Planer, Head Sequence, 1st surface planer 5.5kw, 2nd vertical edge planer far side 7.5kw does both verticals spindles,...