Wadkin MZF Bandsaw Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once registered for sale C...

Wadkin AGS 10 inch sawbench Appraisal: Fully refurbished new bearings Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once ...

Sedgwick MB Planer thicknesser Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once registere...

Wadkin BTS 630 planer thicknesser DC Braked Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, o...

Dominion Lathe Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once registered for sale Colle...

Wadkin BFT Surfce Planer 9 inch wide Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once reg...

Wadkin DMV Morticer Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once registered for sale ...

Wadkin RM 24 inch Planer Thicknesser Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once reg...

Wadkin LT SurfacePlaner Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once registered for s...

Startrite 20 S 5 Bandsaw Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once registered for ...

Wadkin BRA 350 crosscut Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once registered for s...

Wadkin BRA 350 crosscut DC Braked Appraisal: Good working order Serial No: Location: Kirkby in Ashfield Viewing: by appointment only, once regist...

Wadkin DM Hille chisel Morticer said to be the best Wadkin Morticer ever built for ease of use reducing operator fatigue. 3 phase machine, cleaned...

Wadkin 8 head Planer and moulder. Model number GEM170 The machine is now disconnected, and was in good working order when in the Premdoor factory ...

Gannomat Elite 25 auto multi drilling gluing and auto dowel inserting machine. 3 phase machine 415 volts. Appraisal: Tested and in good order. Ser...

Egurko Ortza UK 14/9 glue pot Edgebander. 3 phase machine 415 volts. Appraisal: Tested and in good order. Serial No: Location: Herefordshire View...

Viet RHAM 1350 production line fladder sander. Maximum working width 1350mm, removed in full working order. Comes with stand alone control panel, ...

Holzher 1424 Perfect edgebander with cartridge glue dispenser and corner rounding. It has the usual trimmers scrapers/ moulders and buffers withe ...

Wadkin GA 7 head planer moulder with universal head. Thicknesser saw spindle . The machine has a yellow sound enclosure. Appraisal: Serial No: L...

SCM R800 vertical band resaw, the most popular resaw in the UK. 15kw - 20hp powerful main motor driving the blade, power feed to take the timber t...

Wadkin RU lathe straight out of a pattern makers workshop. This is a seriously large capacity lathe not to be found in your diy store. Wadkin RU W...

Scm Alfa 45C 4500Mm Cnc Beam Saw With Scribing. Comes complete with Xilia Master X/Plus Control. Serial No AR3641. Year of Manufacture 1994 . Cont...

Brookman 25 pin automatic dovetailer. A quality 25 pin dovetailer that will produce up to 25 pins in one pass on two pieces of timber, ie: drawer ...

Stenner VHM36 resaw with power feed. 11kw - 15hp powerful main motor driving the blade, power feed to take the timber through, nice heavy duty mac...

ski and snowboard edging and sanding machine with auto feed and two speed belt. Made by the R.off.B company who have there machinery worldwide. Th...

Wadkin EKA 3 head tenoner with modern chip limiter top and bottom tenon blocks, manually braked motors top and bottom. These machines are used in ...

Industrial heavy duty Straight Line Edger/ Multi ripping saw made by OGAM Italy.. Appraisal: Serial No: Location: Herefordshire Viewing: by appo...

Wadkin wide belt speed sander. The sander is Industrial 3 phase electrics 415v. The sander has a sanding width of around 1000mm with roller pad so...

Dominion BXA 5 head tenoner with modern cutter blocks. • Top & Bottom Tenon Heads, Top & Bottom Scribing Head, 5 x 2 HP Motors, Modern tooling, Ti...

Wadkin ECA 2 head tenoner in original colours. The machine is very clean, everything has been checked and tested, the dc brake is set to stop the ...

Wadkin BEM spindle Moulder. My personal view is that no other spindle can compare. 1 1/4" diameter spindle. 430mm diameter tooling under bed. Larg...

Wadkin EC 5 head tenoner. Appraisal: Checked and tested runs well. Serial No: Location: Herefordshire Viewing: by appointment only, once register...

Scm Minimax planer thicknesser has a capacity to plane 410 x 230mm. Cast iron machined beds and a good solid locking fence, pivoting fence for 90 ...

Wadkin CP320 panel saw. Main blade and scoring blade. 3200mm sliding table. This is 3 phase electrics. Specification: Squaring capacity 3200x3200m...

SCM SI320 panel saw. The saw features the 3200mm sliding table to accommodate large sheet material, fitted with scoring unit and main blade for us...

OGAM 280 Straight Line Edger/ Multi ripping saw made by OGAM Italy.. Appraisal: Serial No: Location: Herefordshire Viewing: by appointment only...

Wadkin JTA disc and bobbin sander. The sander is Industrial 3 phase electrics 415v. One end has the disc sander with adjustable angle table, the o...

Wadkin UOS 18" x 9" planer thicknesser Appraisal: good working order. Serial No: Location: Herefordshire Viewing: by appointment only, once regis...

MAKA STV-61-VZ HORIZONTAL OSCILLATING MORTICER WITH AUXILLIARY ROUTER HEADS. Appraisal: electrically tested Serial No: Location: Herefordshire V...

Robland Z320RS panel saw. 3.2 meter sliding table for large sheet cutting with main blade and scoring blade. 3 phase machine 415 volts. Appraisal:...

Sahara single roller pad wide belt speed sander. The sander is Industrial 3 phase electrics 415v. The sander has a sanding width of around 900mm. ...

Wadkin SRV Rip saw fitted with DC braking. This saw will take up to a 30" diameter blade. A rare saw with such a capacity. The saw comes fitted wi...

Wadkin Rip saw. This saw will take up to a 30" diameter blade. A rare saw with such a capacity. The saw comes ready for work and fitted with circu...

Sagar tenoner with modern cutter blocks. Very heavy duty would suit joinery or framing uses. Tried and tested, has top and bottom tenon heads. The...

Weinig 929 grinder. suitable for straight knife grinding whilst knives are still in the block, also suitable for profile grinding. Appraisal: ele...

Wadkin SP12 panel saw with main and scoring unit. Specification: • Sliding Table 1350mm x 1300mm. Max diameter blade 400mm. Saw projection at 90 d...

Wadkin Panelmaster Panel saw with scribing unit and dc braking system. Machine specification; Table size 744 x 1067mm. Sliding table 360 x 2520mm....

Wadkin BSW rip saw with DC brake fitted. Appraisal: Cleaned, checked and tested. Machine top has been greased. Serial No: Location: Herefordshi...

Wadkin BAOS planer thicknesser with DC braking system. The planer has a width capacity of 310mm as does the thicknesser X 230mm depth. 3 phase mac...

two head Dominion DPA hollow chisel and Chain morticer. Appraisal: electrically tested Serial No: Location: Herefordshire Viewing: by appointment...

Wadkin C6 Bandsaw C600 Industrial 3 Phase. DC braking unit fitted Appraisal: tested and in good working order Serial No: Location: Herefordshire ...

Wilson FM spindle Moulder with 30mm spindle and reversible spindle rotation in very clean condition. Size1000mm x 700mm. Rise & Fall with lock. Sp...

Wadkin 30BZB Bandsaw Industrial 3 Phase Appraisal: tested and in good working order. Serial No: Location: Herefordshire Viewing: by appointment o...

Sedgwick Tesh Tenoning Machine. 3 phase machine 415 volts, 2.2kw 3hp each. Appraisal: Tested and in good order. Serial No: Location: Herefordshir...

Veneer Press Laminating Veneering Vacuum Press Machine Kitchen Manufacture. This is 3 phase electrics Appraisal: electrically tested Serial No: L...

two head Robinson hollow chisel and Chain morticer. Appraisal: electrically tested Serial No: Location: Herefordshire Viewing: by appointment on...

Rye HFB300 Edgebander. the Edgebander will do straight or curved applications. Appraisal: working order Serial No: Location: Herefordshire Viewin...

Wadkin DR bandsaw. These machines are characterised by steady vibrationless running at high speed, essential for clean accurate sawing in hard or ...

Wadkin MA hollow chisel morticer. Wadkin MA will take a chain or chisel. The Morticer comes complete with a brand new manual. The Wadkin MA Morti...

Wadkin MA hollow chisel morticer. The Wadkin MA will take a chain or chisel. Currently set up with hollow chisel mortice, does have some tooling f...