Food & Beverage Equipment Auctions

Tank - Rectangular Molasses Tank, 3.0 metres x 2.6 metres x 2.9 metres high with inlets, outlets, access ports etc. Working volume about 22 cubic ...

Hydraulic Powerpack - Vickers Hydraulic Powerpack, with 7.5kW pump. This unit is on casters, has an oil bund and 8 No spool valves. The pump is a ...

U Trough Screw - Texpan U Trough Screw Conveyor, 600mm dia. x 3.7 metres long with contrawound flight to a central outlet. This conveyor can shutt...

Levelling Screw - Purpose Made 400mm dia. Levelling Screw, 2.65 metres long mostly in stainless steel. The conveyor has an open base, a top mounte...

Brush Sifter - KEK Type 800 Brush Sifter, in stainless steel. It has 300 mm dia. x 800 mm long mesh cylinder and a 4 kW motor. (2 remaining) (UCPE...

Pellet Press - Swiss Combi 4/4K Pelleting Press, with what looks like a 160kW drive, no plate. The press has a force feeder, a set of four rolls a...

Rotary Drum Dryer - Swiss Combi MK 5 Triple Pass Rotary Drum Dryer, probably mid 70s vintage but been refurbished in recent years. The drum is abo...

U Trough Screw - 250 mm dia. U Trough Screw Conveyor, 2.1 metres long with drive (UCPE 5516) Price - £450Please read the following important notes...

Oil Extraction Press - Rosedown Oil Extraction Screw Press, with 4 stage cooker and 30kW main drive and 11kW cooker drive. Rated at 12 tonnes/day ...

Horizontal Pellet Cooler - Swiss Combi Two Deck Moving Bed Pellet Cooler, 10 metres long. Bed width is 1.9 metres and overall body width is 2.3 me...

Chain & Flight - Cimbria Stainless Steel Cased Chain and Flight Conveyor, with swan neck bend and inclined outlet end. The case is 260 mm wide x 3...

Pellet Press Spares - Unused 6.0mm Die, for Compress 235 pellet press. The die is 110 mm thick and has a 1:20 taper (UCPE 5749) Price - £1,000Plea...

Pellet Press Spares - Part worn 6.0mm Die, for a Paladin 1200B HR pellet press. The die is 110 mm thick and has a 1:12 taper. It is 50% worn but r...

Pellet Press Spares - Part worn 3.0mm Die, for Compress 235 pellet press. The die is 70 mm thick and is 40% worn (UCPE 5752) Price - £750Please re...

Oil Extraction Press - Complete Oil Seed Rape Extraction Plant, built with new machines in 2007 and closed in 2010. The oil was going into the bio...

Pellet Press Spares - Selection of New and Used Dies, prices on application (UCPE 6248) Price - POAPlease read the following important notes:-***O...

Pellet Press - Orbit 175 Pellet Press Package, including:- one unit complete with conditioner and starter panel believed to be in good working ord...

Oil Extraction Press - Strahle SK 132M/4 Screw Press, on support stand with 7.5kW drive. Believed to be 2005 vintage. Never been used. (2 remaini...

Sieve Cleaners - Westrup FB-1500 Single Deck Reciprocating Inclined Deck Grain Cleaner, screen deck is 1500mm x 2700mm and overall dimensions are ...

Continuous Mixer - Stainless Steel Mixing Screw, approx. 500mm dia. x 3.47m long, with 7.5kw drive. Shaft speed is about 70rpm. Mixing is by paddl...

U Trough Screw - Heavy duty centreless screw with drive unit but no trough. The flight is 430mm diameter with 450mm pitch and 20mm thick. It is on...

Chain & Flight - Farmers Friend swan neck chain and flight conveyor 175mm wide with 200mm deep trough. About 12 metres of trough but no drive. (2 ...

U Trough Screw - U trough screw conveyor 250mm diameter x 12 metres long (UCPE 6273) Price - £3000Please read the following important notes:-***Ov...

U Trough Screw - U trough screw conveyor 250mm diameter x 6 metres long (UCPE 6274) Price - £1500Please read the following important notes:-***Ove...

Chain & Flight - Swan neck chain and flight conveyor 200mm wide with 340mm deep trough. About 8 metres long with tail inlet, drive and shallow swa...

Chain & Flight - Perry 150mm chain and flight conveyor 5.5 metres long with drive. Poor condition (UCPE 6278) Price - £500Please read the followin...

Belt Feeder - Line of 6 No belt feeders in a supporting framework with small reception hoppers and a discharge belt conveyor below. This was used ...

Deawner - Blair deawner 800mm long x 350mm wide x 400mm high with fabricated under hopper. Overall height 1016mm. Fingers are worn but functional....

Deawner - Blair deawner 800mm long x 380mm wide x 400mm high with fabricated under hopper. Overall height 1118mm. Fingers are worn but functional....

Screw Press - Moret model SH82 dewatering screw with 90kw drive. This was refurbished around 2008. (UCPE-6293) Price £5,000Please read the followi...

Srew Conveyor - 350mm diameter U trough screw conveyor 5.5 metres long with 10mm thick flights and 178mm pitch. It is jacketed and was probably st...

Chiller - York YIA HW-5C3/702-50-C-S-C Single-Effect Absorption Chiller (steam and hot water chiller). Serial no. ULVM086484. Built 2009. Shipping...

Vibro Sifter - Simon vertical vibro sifter. (2 remaining) (UCPE 6298) Price - £1,000 eachPlease read the following important notes:-***Overseas bu...

Silos - Isala glass reinforced plastic silo with steel support frame. Silo is 2.0 metres diameter with 4.8 metre vertical and 2.0 metre deep hoppe...

Reversejet Filter - Purpose built stainless steel reversejet filter in 750mm diameter circular case with conical discharge hopper. Overall height ...

Complete Plant - Nearly complete straw pelleting plant mostly refurbished used machines. Plant never assembled, never used. Comprises 6 metre bale...

Tub Grinder - Seko tub grinder with a 2.2 metre diameter tub and a 75kw hammer mill. The feed screw from the tub to the hammer mill has been rebui...

Reversejet Filter - Airmaster MJX26/L/48 reversejet filter with under hopper, rotary valve, fan, supporting steelwork and explosion relief panels....

Pellet Press - Swiss Combi 2/2K pelleting press with 110kw drive and force feeder. This is a two roll machine and includes 4 No unused roll shells...

"Screw Press - Babbini model PE10B twin screw dewatering press serial number 634 built in 2011. It has twin parallel stainless steel screws about ...

Screw Conveyor - Centreless screw flight only 350 mm diameter x 9.3 metres long with a 15kw geared drive. Requires a steel U trough with abrasion ...

Bed Dryer - Buhler OTW 150 fluid bed dryer/cooler, new 1998 but never used. It can be used to dry or cool a variety of products such as cereals, f...

Screw Conveyor - 250mm diameter U trough screw conveyor 4.0 metres long. (UCPE 6332) Price - £1,400.Please read the following important notes:-***...

Screw Conveyor - 250mm diameter U trough screw conveyor 4.5 metres long. (UCPE 6333) Price - £1,450.Please read the following important notes:-***...

Screw Conveyor - 250mm diameter U trough screw conveyor 5.0 metres long. (UCPE 6334) Price - £1,500.Please read the following important notes:-***...

Hammer Mill - Champion hammer mill model 54 x 22 on base frame with 110kw 1485 rpm direct drive and feed chute with magnet. Large number of spare ...

Packaging - Top sheeters. (2 remaining) (UCPE 6337) Price - £7,500 each.Please read the following important notes:-***Overseas buyers - All lots a...

Tub Grinder - Stratek tub grinder model MS300/2-ES with twin shredding rotors with 30kw motors and twin screw discharge with heavy particle drop o...

Mixer - Cormall chain and slat mixers. (2 remaining) (UCPE 6342) Price - £1,500 each.Please read the following important notes:-***Overseas buyers...

Screw Conveyor - U trough screw conveyors with large diameter centre tubes and no hanger bearings. Maybe 800mm flight. (2 remaining) (UCPE 6343) P...

Hopper - Hopper on loadcells. Nominal 1250mm x 1250m x 1250mm wall height. Overall height 2450mm. (UCPE 6345) Price - £1,500.Please read the follo...

Feed Bins - Feed bins of various sizes. (9 remaining) (UCPE 6346) Price - £4,000 each.Please read the following important notes:-***Overseas buyer...

Hammer Mill - Hammer mill about 500mm wide x 900mm dia with 45kw drive and twin screw feeder. Includes 6mm screen. (UCPE 6348) Price - £3,500.Plea...

Screw Conveyor - Jacketed inclined round cased screw conveyor 5.1 metres long and 500mm diameter outside jacket. Can be used for heating or coolin...

Sieve - PTN rotary sieve model SR 200 E built in 2008. It has a 4kw rotation drive and a 1.5kw vibration drive. Excellent condition. Up to 200tph ...