Mild Steel Tank Bund, approx. 4m long x 2m wide x 920mm deep, has had a small sections cut out of the body which will need patching, lot located i...
Stainless Steel Tank, with conical base and 200mm outlet, tank approx. 1.2m dia. x 1.07m on vertical and 600mm deep cone, the top is enclosed with...
Silo, with hopper bottom, agitator, rotary valve and filter on top, approx. 5m dia. x 7m high, lot located in Huntingdon, Cambridgeshire (please n...
Surmet Stainless Steel Tank, on mild steel support frame, with mild steel bands, tank is nominal 2m dia. x 5.0 long, working volume approx. 15,000...
Vickers Hydraulic Powerpack, with 7.5kW pump, this unit is on casters, has an oil bund and 8 No spool valves, the pump is a model PVE19RW which wi...
Westrup FB-1500 Single Deck Reciprocating Inclined Deck Grain Cleaner, screen deck approx. 1500mm x 2700mm and overall dimensions are 1720mm wide ...
ICS Group Chiller, approx. 3.0m long x 1.5m wide x 2.5m high, lot located in Navenby, Lincolnshire, loading free of charge - yesPlease read the fo...
Deri Kool Stainless Steel Milk Cooling Tank, with agitator, overall dimensions approx. 2.4m long x 750mm for cooling pump x 1.4m wide x 1.3m high ...
Stainless Steel Hand Operated Pellet Press Dump Chute, approx. 390mm x 250mm x 500mm high, lot located in Ware, Hertfordshire, loading free of cha...
Round Cased Screw Conveyor, with 340mm flight dia. inspection plates and geared drive unit., the working length approx. 3.86m and the inlet and ou...
Cormall Chain & Slat Mixers, believed to be KB6 models, with 6m3 volume and 4kW drive, overall length approx. 4.6m x 1.25m wide x 2m high includin...
Stainless Steel Horizontal Tank, with stainless steel supports, approx 1.5m dia. x 2.5m long, lot located in Navenby, Lincolnshire, loading free o...
Stainless Steel Hand Operated Pellet Press Dump Chute, approx. 400mm x 250 mm x 620mm high, lot located in Ware, Hertfordshire, loading free of ch...
Cimbria Stainless Steel Cased Chain And Flight Conveyor, with swan neck bend and inclined outlet end. The case is approx. 260mm wide x 345mm deep ...
Stainless Steel Round Cased Screw Conveyor, with steam/ hot water jacket, over 3.0m of length, conveyor flight approx. 200mm dia., with 100mm dia....
Mild Steel Silo, with flat base and sweep arm discharge (for wood chip or non free flowing material), the silo is in three sections one of which i...
Geelen 1.4m x 1.4m Box Cooler, approx. 2m x 2m x 3m, 3 tonne per hour capacity, loading free of charge - yes, lot located in Athy, Kildare (vendor...
Mild Steel Tank Bund, approx. 4m long x 2m wide x 920mm deep, has had a small sections cut out of the body which will need patching, lot located i...
Byworth Boiler MX1500 including Hot Well/Blowdown vessel
Freestanding Machine Shop Extractor Unit
Freestanding Machine Shop Extractor Unit
Freestanding Machine Shop Extractor Unit (DCE Unimaster)
Freestanding Machine Shop Extractor Unit (DCE Unimaster)
Freestanding Machine Shop Extractor Unit
New & Boxed Alfa Laval M6-MFG 2023 Heat Exchanger
Flushed & Rinsed Alfa Laval M6-MFG Heat Exchanger
Flushed & Rinsed Alfa Laval M6-MFG Heat Exchanger
2 x RS 206-3722 Thermometer Probes
1 x New & Boxed RS 206-3722 Thermometer Probe
2019 Byworth Type YSX1000LN-36 Gas Boiler with Unigas Type NG880X Burner (Output 1500-8800 KW) c/w all ancillary equipment including Tanks, Pumps,...
Chair BLUES is made of steel profile with thickness of 1,2mm and characteristic wider profile 25x25 mm which is additionally fluted. It makes the ...
It makes the chairs look very elegant and old fashion.
1 x Electric Griddle, 54cm Commercial Half Flat Grooved Teppanyaki Grill, 3000W Stainless Steel Countertop Flat Top Griddle with Temperature Co...
MIXED MYSTERY BOX, Closing Down Store, everything new, KitchenwareMIXED MYSTERY BOX containing kitchen equipment average RRP£250 Please note, if...
MIXED MYSTERY BOX containing kitchen equipment average RRP£250 Please note, if more than one lot is purchased the seller will only send each lot s...
MIXED MYSTERY BOX, Closing Down Store, everything new, KitchenwareMIXED MYSTERY BOX containing kitchen equipment average RRP£250 Please note, if m...
MIXED MYSTERY BOX, Closing Down Store, everything new, KitchenwareMIXED MYSTERY BOX containing kitchen equipment average RRP£250 Please note, if m...
MIXED MYSTERY BOX, Closing Down Store, everything new, KitchenwareMIXED MYSTERY BOX containing kitchen equipment average RRP£250
Pellet Press - Swiss Combi 4/4K Pelleting Press, with what looks like a 160kW drive, no plate. The press has a force feeder, a set of four rolls a...
Screw Conveyor - 350mm diameter U trough screw conveyor 6.4 metres long. No drive. (UCPE 6487) Price - £1,500.Please read the following important ...
Tub Grinder - Seko tub grinder with a 2.2 metre diameter tub and a 75kw hammer mill. The feed screw from the tub to the hammer mill has been rebui...
U Trough Screw - Heavy duty centreless screw flight 350 mm diameter and 350mm pitch. Flights are 20mm thick and total length is 9.3 metres. Requir...
Complete Plant - Nearly complete straw pelleting plant mostly refurbished used machines. Plant never assembled, never used. Comprises 6 metre bale...
Conveyor - 800mm diameter screw conveyor 7.5 metres long with drive. Body in poor state and some of it is missing. 5mm thick flights, 500mm pitch ...
Pellet Press - Van Aarsen C750 pellet press with 160kw motor. Built in 1992 and just been fully refurbished, not used since. Set up for die track ...
U Trough Screw - U trough screw conveyor 250mm diameter x 12 metres long (UCPE 6273) Price - £3000Please read the following important notes:-***Ov...
Bunker - Silo with hopper bottom, agitator, rotary valve and filter on top. 5 metres diameter x about 7 metres high. (UCPE 6461) Price - £5,000.Pl...
Packaging - Top sheeters. (2 remaining) (UCPE 6337) Price - £7,500 each.Please read the following important notes:-***Overseas buyers - All lots a...
Pellet Cooler - Geelen pellet cooler model VK 24 x 24 RP built in 2018 but has never been used. This machine is not fully assembled, the stainless...
Pump - Diaphragm pump. (UCPE 6447) Price - £250.Please read the following important notes:-***Overseas buyers - All lots are sold Ex Works (EXW)**...
Rotary Valve - Blowline rotary valve from U trough screw to blowline. (UCPE 6468) Price - £200.Please read the following important notes:-***Overs...
Screw Conveyor - Screw conveyor with feed hopper on top but no drive. 500mm diameter x 2.0 metres long with 1.68 metre long x 460mm deep feed hopp...
Rotary Valve - Cast steel rotary valve with geared drive. 600mm rotor diameter x 500mm wide. Inlet 700mm dia, 970mm deep, rectangular outlet. (UCP...
Reversejet Filter - Airmaster MJX26/L/48 reversejet filter with under hopper, rotary valve, fan, supporting steelwork and explosion relief panels....
Loading...
