Food & Beverage Equipment Auctions

Pellet Press - Van Aarsen C750 pellet press with 160kw motor. Built in 1992 and just been fully refurbished, not used since. Set up for die track ...

U Trough Screw - U trough screw conveyor 250mm diameter x 12 metres long (UCPE 6273) Price - £3000Please read the following important notes:-***Ov...

Bunker - Silo with hopper bottom, agitator, rotary valve and filter on top. 5 metres diameter x about 7 metres high. (UCPE 6461) Price - £5,000.Pl...

Packaging - Top sheeters. (2 remaining) (UCPE 6337) Price - £7,500 each.Please read the following important notes:-***Overseas buyers - All lots a...

Pellet Cooler - Geelen pellet cooler model VK 24 x 24 RP built in 2018 but has never been used. This machine is not fully assembled, the stainless...

Pump - Diaphragm pump. (UCPE 6447) Price - £250.Please read the following important notes:-***Overseas buyers - All lots are sold Ex Works (EXW)**...

Rotary Valve - Blowline rotary valve from U trough screw to blowline. (UCPE 6468) Price - £200.Please read the following important notes:-***Overs...

Screw Conveyor - Screw conveyor with feed hopper on top but no drive. 500mm diameter x 2.0 metres long with 1.68 metre long x 460mm deep feed hopp...

Rotary Valve - Cast steel rotary valve with geared drive. 600mm rotor diameter x 500mm wide. Inlet 700mm dia, 970mm deep, rectangular outlet. (UCP...

Reversejet Filter - Airmaster MJX26/L/48 reversejet filter with under hopper, rotary valve, fan, supporting steelwork and explosion relief panels....

Chain & Flight - Cimbria Stainless Steel Cased Chain and Flight Conveyor, with swan neck bend and inclined outlet end. The case is 260 mm wide x 3...

Dryer - Allgaier rolling bed dryer model WB-T-2.5-12.0 built in 2018 but has never been used. This dryer has the under hopper, supporting steel wo...

Bunker - Large silo with sweep arm discharge and filter on top. About 4 metres diameter x 6 metre wall height. Say 75 cubic metres total volume. (...

Tank - Stainless steel horizontal tank with stainless steel supports. Approx 1.5 metres diameter x 2.5 metres long. (UCPE 6450) Price - £3,000.Ple...

U Trough Screw - Texpan U Trough Screw Conveyor, 600mm dia. x 3.7 metres long with contrawound flight to a central outlet. This conveyor can shutt...

Mixer - Stainless steel ribbon mixer by Euromilling A/S. Model HM 1450 SS built in 2018. Body length 1.5 metres x 1.1 metres wide x 2.5 metres hig...

Silos - Isala glass reinforced plastic silo with steel support frame. Silo is 2.0 metres diameter with 4.8 metre vertical and 2.0 metre deep hoppe...

Press Feeder - Stainless steel twin chain pellet press feed conveyor. 1.6 metre shaft centres and 300mm working width. (UCPE 6365) Price - £1,000P...

Vibro Sifter - Simon vertical vibro sifter. (2 remaining) (UCPE 6298) Price - £1,000 eachPlease read the following important notes:-***Overseas bu...

Deawner - Blair deawner 800mm long x 380mm wide x 400mm high with fabricated under hopper. Overall height 1118mm. Fingers are worn but functional....

Chiller - ICS Group chiller approx 3.0 metres long x 1.5 metres wide x 2.5 metres high. (UCPE 6445) Price - £1,000.Please read the following impor...

Hydraulic Powerpack - Vickers Hydraulic Powerpack, with 7.5kW pump. This unit is on casters, has an oil bund and 8 No spool valves. The pump is a ...

Dump Chutes - Stainless steel hand operated pellet press dump chute, 400 mm x 250 mm x 620 mm high (UCPE 4550) Price - £100Please read the followi...

Silo - Mild steel silo with flat base and sweep arm discharge for wood chip or non free flowing material. The silo is in three sections one of whi...

Conveyor - Bunker discharge screw 500mm dia x 5 metres long with 200mm dia center tube and open end discharge. (UCPE 6457) Price - £1,000.Please r...

Pellet Press - Swiss Combi 2/2K pelleting press with 110kw drive and force feeder. This is a two roll machine and includes 4 No unused roll shells...

Filter - Provenair reverseair filter about 1.5 metre diameter with 6 metre body height and rotary valve on outlet. (UCPE 6466) Price - £1,500.Plea...

Chain & Flight - Swan neck chain and flight conveyor 200mm wide with 340mm deep trough. About 8 metres long with tail inlet, drive and shallow swa...

Mixer - Cormall chain and slat mixers believed to be KB6 models with 6m3 volume and 4kw drive. Overall length 4.6 metres x 1.25 metres wide x abou...

Extruding Plant - Pet Food/Fish Food extruding line comprising Clextral BC82 twin screw extruder with Wenger 7DCC conditioner, steam set, water pu...

Rotary Drum Dryer - Swiss Combi MK 5 Triple Pass Rotary Drum Dryer, probably mid 70s vintage but been refurbished in recent years. The drum is abo...

Reversejet Filter - Purpose built stainless steel reversejet filter in 750mm diameter circular case with conical discharge hopper. Overall height ...

Tank - Stainless steel open topped tank with mild steel base support. The tank is 1.5 metres diameter a 1.6 metres high including base. Tank depth...

Bunker - Handling Techniques silo with sweep arm discharge. About 1.5 metres diameter x 4.5 metres wall height. Say 8 cubic metres total volume. (...

Cooler - Dari Kool stainless steel milk cooling tank with agitator. Overall dimensions 2.4 metres long + 750mm for cooling pump x 1.4 metres wide ...

Horizontal Pellet Cooler - Swiss Combi Two Deck Moving Bed Pellet Cooler, 10 metres long. Bed width is 1.9 metres and overall body width is 2.3 me...

Sieve - Cryloc rotary pellet sieve model 46-31 built in 2018 but has never been used. This is a single deck sieve and has a 2.2kw drive. Screen pe...

Sieve Cleaners - Westrup FB-1500 Single Deck Reciprocating Inclined Deck Grain Cleaner, screen deck is 1500mm x 2700mm and overall dimensions are ...

Dump Chutes - Stainless steel hand operated pellet press dump chute, 390 mm x 250 mm x 500 mm high (UCPE 4549) Price - £100Please read the followi...

Tanks - Mild steel tank bunds. 4.0 metres long x 2.0 metres wide x 920mm deep. Both have had small sections cut out of the body which will need pa...

Screw Conveyor - 250mm diameter U trough screw conveyor 4.0 metres long with drive. (UCPE 6488) Price - £1,250.Please read the following important...

Pellet Press - Salmatec Maxima 700-100 3K pellet presses built in 2018 and have never been used. Each press has 2 x 132kw drives, stainless steel ...

Screw Conveyor - Round cased screw conveyor with 340mm flight diameter, inspection plates and geared drive unit. The working length is 3.86 metres...

U Trough Screw - Heavy duty centreless screw with 15kw geared drive unit but no trough. The flight is 400mm diameter with 450mm pitch and 20mm thi...

Deawner - Blair deawner 800mm long x 350mm wide x 400mm high with fabricated under hopper. Overall height 1016mm. Fingers are worn but functional....

Sieve - Turner 6 x 4 screen. (UCPE 6467) Price - £1,000.Please read the following important notes:-***Overseas buyers - All lots are sold Ex Works...

Tank - Horizontal mild steel tank in transport frame. The tank is lagged and clad but not good external condition. Frame size 6.0 metres long x 2....

Continuous Mixer - Stainless Steel Mixing Screw, approx. 500mm dia. x 3.47m long, with 7.5kw drive. Shaft speed is about 70rpm. Mixing is by paddl...

Tub Grinder - Stratek tub grinder model MS300/2-ES with twin shredding rotors with 30kw motors and twin screw discharge with heavy particle drop o...

Tank - Circular plastic tank 1100mm diameter x 1700mm high with top cover and internal agitator with motor. About 1500 litres capacity. (UCPE 6411...

Screw Conveyor - Jacketed inclined round cased screw conveyor 5.1 metres long and 500mm diameter outside jacket. Can be used for heating or coolin...

Tank - Stainless steel tank by Surmet on mild steel support frame with mild steel bands. Tank is nominal 2.0 metres diameter x 5.0 long. Working v...

Screw Conveyor - Stainless steel round cased screw conveyor with steam/hot water jacket over 3.0 metres of length. Conveyor flight is 200mm diamet...

Sieve - PTN rotary sieve model SR 200 E built in 2008. It has a 4kw rotation drive and a 1.5kw vibration drive. Excellent condition. Up to 200tph ...

Tank - Stainless steel tank with conical base and 200mm outlet. Tank is 1.2 metres diameter x 1.07 metres on vertical and 600mm deep cone. The top...

Sieve - Milltech rotary pellet sieve 1.3 metres diameter with 20mm screen perforations. (UCPE 6473) Price - £750.Please read the following importa...

Pellet Press - Orbit 175 pellet press package including one complete press with 45kw drive, conditioner and starter panel. There is a second 175 p...

U Trough Screw - 250 mm dia. U Trough Screw Conveyor, 2.1 metres long with drive (UCPE 5516) Price - £450Please read the following important notes...

Dust Filter - Cimbria Cyclofan model CF20 no fan. Serial number 14811. Body 1000mm diameter. (UCPE 6417) Price - £500.Please read the following im...