• Home
  • Search Results

*

72735 item(s)

Refine your search

Estimate

Filter by Price Range

Location

Primary Category

Category

Brand

Item Type

Auction Type

Country

Auctioneer

  • List
  • Grid
  • 72735 item(s)
    /page

Sampling Unit - Granta In-Line Grain Sampler, with controls (UCPE 4783) Price - £850Please read the following important notes:-***Overseas buyers ...

Chain & Flight - Cimbria Stainless Steel Cased Chain and Flight Conveyor, with swan neck bend and inclined outlet end. The case is 260 mm wide x 3...

Belt & Bucket Elevator - Carier 12in Belt and Bucket Elevator, 10.36 metres high with painted case and refurbished boot. Capacity 60tph (UCPE 6225...

Fan - 30kw suction fan with silencer. (UCPE 6465) Price - £1,500.Please read the following important notes:-***Overseas buyers - All lots are sold...

Labeller - Logopack pallet labeller model 920 11 PFR with control panel, built 2011. (UCPE 6500) Price - £5,000.Please read the following importan...

Dryer - Allgaier rolling bed dryer model WB-T-2.5-12.0 built in 2018 but has never been used. This dryer has the under hopper, supporting steel wo...

Fan - Suction fan hammer mill to silo. About 15kw. (UCPE 6460) Price - £500.Please read the following important notes:-***Overseas buyers - All lo...

Bunker - Large silo with sweep arm discharge and filter on top. About 4 metres diameter x 6 metre wall height. Say 75 cubic metres total volume. (...

Sieve - Simon Barron Z1 single deck pellet sieve. (UCPE 6322) Price £1,000.Please read the following important notes:-***Overseas buyers - All lot...

Weigher - Walthambury bag weigher with pneumatic bag clamp and inclined belt feeder. Can weigh from 10kg to 50kg. (UCPE 6482) Price - £1,000.Pleas...

Tank - Stainless steel horizontal tank with stainless steel supports. Approx 1.5 metres diameter x 2.5 metres long. (UCPE 6450) Price - £3,000.Ple...

Baler - Mesken-Haule Jumbo baler built 2008 and commissioned 2009. Can bale shavings or chopped straw. This is a three ram machine with an integra...

Rotary Valve - Rotolok drop through rotary valve with drive. 620mm deep body and 350mm diameter inlet and outlet. (UCPE 6421) Price - £750.Please ...

U Trough Screw - Texpan U Trough Screw Conveyor, 600mm dia. x 3.7 metres long with contrawound flight to a central outlet. This conveyor can shutt...

Mixer - Stainless steel ribbon mixer by Euromilling A/S. Model HM 1450 SS built in 2018. Body length 1.5 metres x 1.1 metres wide x 2.5 metres hig...

Dust Filter - Provenair reversair filter with bag cleaning fan. It is 2.00 metres diameter and about 7.0 metres overall high including supporting ...

Bunker - Twin bunker part inclined, 10 metrs long x 2.5 metres wide x 2.5 metres high and part 3.5 metres high. Has twin chain and slat discharge ...

Dust Filter - Provenair reversair filter with rotary valve on discharge and cleaning fan. It is 2.24 metres diameter and 9.26 metres overall high ...

Straw Bedding Plant - Straw bedding plant believed to be around 2015 vintage. Includes a big bale conveyor with shredder (believed to be by Ken Mi...

U Trough Screw - U trough screw conveyors with 450mm diameter flights in 550mm wide case. They have 200mm diameter centre tubes and no hanger bear...

Aspirating Cleaners - Law Denis Aspirating Cleaner, section from above a rotary cleaner complete with fan and trash auger (UCPE 5302) Price - £1,5...

Conveyor - Blower and pipework to take dust to the silo feeding the furnace. (UCPE 6469) Price- £1,000.Please read the following important notes:-...

Silos - Isala glass reinforced plastic silo with steel support frame. Silo is 2.0 metres diameter with 4.8 metre vertical and 2.0 metre deep hoppe...

Shredder - Morbark Mulch Hog HD30, YOM, Ser No and running hours not known. It has a 770mm wide tray feeder feeding the 150kw mill and a 900mm wid...

Drop Through Rotary Valve - Extech EXMV 650/850 Drop Through Rotary Valve, this valve has a weighted bypass flap in the inlet and rotating side pl...

Press Feeder - Stainless steel twin chain pellet press feed conveyor. 1.6 metre shaft centres and 300mm working width. (UCPE 6365) Price - £1,000P...

Vibro Sifter - Simon vertical vibro sifter. (2 remaining) (UCPE 6298) Price - £1,000 eachPlease read the following important notes:-***Overseas bu...

Drum Dryer - Swiss Combi rotary drum dryer in stainless steel believed to have been built in 2000. Decommissioned in 2005 after only about 3 years...

Deawner - Blair deawner 800mm long x 380mm wide x 400mm high with fabricated under hopper. Overall height 1118mm. Fingers are worn but functional....

Furnace - Energy Unlimited Biomass Burner, believed built in 2008. It has an output of 5MW thermal (18,000,000 BTU). Includes digital control syst...

Chiller - ICS Group chiller approx 3.0 metres long x 1.5 metres wide x 2.5 metres high. (UCPE 6445) Price - £1,000.Please read the following impor...

Conveyor - 2.5 metre long hydraulic log tipping conveyor with 4 x V rollers. (UCPE 6451) Price - £2,500.Please read the following important notes:...

Conveyor - Approx 600mm wide belt conveyor with galvanised case. About 15.5 metres long. This unit conveys shavings to the bunker. (UCPE 6455) Pri...

Hydraulic Powerpack - Vickers Hydraulic Powerpack, with 7.5kW pump. This unit is on casters, has an oil bund and 8 No spool valves. The pump is a ...

Baler - BalePak BP120 with control panel. Factory reconditioned in 2009 done about 10 bales since. Bale size 290mm x 440mm. Output up to 120 bales...

Deduster - Mechon Environmental straw deduster model AS2500. Body is 2.5 metres long and rotor is about 1 metre diameter. (UCPE 6475) Price - £2,0...

Hammer Mill - Champion Hammermill Beaters, unused, in boxes of 45 balanced sets. There are 48 boxes available. Each beater has hardened edges maki...

Dump Chutes - Stainless steel hand operated pellet press dump chute, 400 mm x 250 mm x 620 mm high (UCPE 4550) Price - £100Please read the followi...

Walking Floor Bunker - Nazzareno 2R-9000 Push Floor Bunker (built in 2008), with 2 x 18.5kW hydraulic powerpacks. This unit comprises two grids si...

Silo - Mild steel silo with flat base and sweep arm discharge for wood chip or non free flowing material. The silo is in three sections one of whi...

Storage Silo - Crittall patern galvanised rectangular silos nominal 8' x 10' x 18' high. Capacity approx 30 tonnes of grain. 6 remaining. (UCPE 64...

Cyclone - Buhler HT22 cyclone with a 5kw fan on top and Derion rotary valve on the discharge. Fan can deliver up to 2400m3/hr at 220mm wg. (UCPE 6...

Rotary Valve - Rotary valve with 1000mm diameter rotor and adjustable steel blade tips. The rotor is 750mm wide and has fixed side plates which ro...

Conveyor - Bunker discharge screw 500mm dia x 5 metres long with 200mm dia center tube and open end discharge. (UCPE 6457) Price - £1,000.Please r...

Belt - Tickhill Engineering Belt Conveyor (probably for vegetable handling), It is 2.4 metres long has a part stainless steel part galvanised case...

Shredder - Weima single shaft shredder model WL15 built 1998, Ser No 500-3660. It has a 45kw drive motor and hydraulic power pack. (UCPE 6434) Pri...

Intake System - Guttridge galvanised intake hopper for lorry tipping. It is 3 metres wide and has a 350mm diameter discharge screw with open end b...

Pellet Press - Swiss Combi 2/2K pelleting press with 110kw drive and force feeder. This is a two roll machine and includes 4 No unused roll shells...

Shredder - Scanhugger single shaft shredder model HL 2-7-10. Motor is either 7.5 or 11kw and believed to have been built around 2014. It has a rot...

Weigher - Ward Bekker Digiway single channel linear weigher in stainless steel with control box. Serial number 1901 built 1996.  (UCPE 6330) Price...

Motor - 110 kW 2950 rpm Foot Mounted TEFC Motor (2 remaining) (UCPE 5296) Price - £1,000Please read the following important notes:-***Overseas buy...

Belt - Carier belt conveyor with 300mm wide belt. About 15 metres long (UCPE 6279) Price £2500Please read the following important notes:-***Overse...

Storage Hopper - Roxell galvanised corrugated feed hoppers with blowing in and vent pipes. 2.13 metres diameter x 4.1 metres vertical wall and 2.0...

Motor - TEFC foot mounted 100HP (75KW) 1490 rpm electric motor by Worldwide Electric Corporation. Model WWES100 -15-445TBB. Terminal box covers ar...

Electric Motor - Unused 315kw, 1485rpm TEFC foot mounted motor. (UCPE 6501) Price - £6,000.Please read the following important notes:-***Overseas ...

Dust Filter - Reversejet filter on under hopper, no fan, no ID plate. 1700mm long x 1075mm wide x 4730mm high including under hopper which is 223...

Filter - Provenair reverseair filter about 1.5 metre diameter with 6 metre body height and rotary valve on outlet. (UCPE 6466) Price - £1,500.Plea...

Wood Processing Shredder - Laimet Screw Type Wood Chipper, believed to be a model LS 280 built in 2010. It is on a support stand and has an input ...

Packing Line - Morray Bagging Line, comprising a bag placer, birds beak bag clamp, bag aligner, bag closer, bag stitcher, bag posser, bag kicker a...

Chain & Flight - Vecoplan chain and flight conveyor with mild steel case and open top. The trough is 830mm wide x 515mm deep with internal side ch...

Loading...Loading...

Recently Viewed Lots