Five x 225mm Pneumatic Slide Valves (S6050/SG-5?/S6056/S6059/S6062) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Chain Conveyor, approx. 200mm x 25m long (C6013) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Stainless Steel Surge Hopper with Derion GS250 250mm rotary blowing seal, c/w magnet, serial no. 8723 (note - this lot is situated at ICKLEFORD MI...

Aerzen GMA10.2 Rotary Blower, serial no. 2994511, 7.5kW/2885rpm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Aerzen GMA13.6 Rotary Blower, serial no. 245241, 30kW/2950rpm (6BL001) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Screw Conveyor, 200mm x 3m (C6-030) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Screw Conveyor approx. 200mm x 18m long (C6031) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Screw Conveyor approx. 300mm x 21m long (understood to be galvanised steel – over top of galvanised silos), with four pneumatic slide valves (note...

Bolted Corrugated Galvanised Steel 90 tonne (wheat capacity) Silo, 3.7m dia. x 14m approx. high on straight, 2.3m hopper bottom on steel supports ...

Bolted Corrugated Galvanised Steel 90 tonne (wheat capacity) Silo, 3.7m dia. x 14m approx. high on straight, 2.3m hopper bottom on steel supports ...

Bolted Corrugated Galvanised Steel 90 tonne (wheat capacity) Silo, 3.7m dia. x 14m approx. high on straight, 2.3m hopper bottom on steel supports ...

Bolted Corrugated Galvanised Steel 90 tonne (wheat capacity) Silo, 3.7m dia. x 14m approx. high on straight, 2.3m hopper bottom on steel supports ...

Bolted Corrugated Galvanised Steel 90 tonne (wheat capacity) Silo, 3.7m dia. x 14m approx. high on straight, 2.3m hopper bottom on steel supports ...

Five x 375mm Motorised Slide Valves (S6048/S6047/S6046/S6045/S6044) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Carier Galvanised Steel Chain Conveyor, approx. 225mm x 21m long (C6.7/C6007) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Carier Galvanised Steel Chain Conveyor, approx 225mm x 5.1m long (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Carier Galvanised Steel Belt and Bucket Elevator, approx. 300mm x 15m high (E6004) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Steel Intake Hopper, approx. 3.1m x 2m x 1.5m deep, with magnetic separator in discharge inlet top and 28m long approx. chain conveyor (note - thi...

Seven Section Motor Control Centre (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Bolted Welded Steel Dust Collection Unit, estimated to be 2m dia. x 7m high overall, with rotary seal (note - this lot is situated at ICKLEFORD MI...

Two Bolted Corrugated Steel Silos, 1000 tonne (wheat capacity) approx. 11.25m dia. x 47m high, with two sweep auger dischargers and two Myson Co-A...

Belt and Bucket Elevator, estimated to be 150mm x 25m high (E6-8) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Bolted Welded Steel Screenings Bin, estimated to be 1.8m dia. x 10m on straight and hopper bottom, with three level controls and bin venting unit ...

Provenair Dust Collection Unit, 800mm dia. x 3m high on straight and hopper bottom, with rotary seal, steel spout, 250mm permanent magnetic separa...

Tietjen VL3 HAMMERMILL GRINDER, c/w two magnets, slide and control panel, serial no. 9009, 30kW/2950rpm (GR1) (note - this lot is situated at ICKL...

Simon Barron Le Coq Rotary Sifter, order no. M62045/12/87 (6GR-9), 4kW/1445rpm, with 200mm Rotolok rotary seal (note - this lot is situated at ICK...

STEEL CHAIN CONVEYOR, estimated to be 250mm x 14m long (C5001) (across yard) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Ehrle HD623 Diesel Fired Pressure Washer (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Cochran CLANSMAN GAS FIRED HOT WATER BOILER, serial no. 15/3225, year of manufacture 2003, max continuous rating 1172kW, 5.20 BARG design pressure...

Baldwin Byworth YSX 3000 GAS FIRED STEAM BOILER, serial no. YSX3000-28, year of manufacture 1997, 3000kg per hour, 160psi design pressure, Dunphy ...

Applied Ionics Water Treatment Plant, two exchange units and plastic tank, controls and filter (note - this lot is situated at ICKLEFORD MILL, SG5...

Aerzen GMA13.8 Rotary Blower, 18.5kW/1460rpm, serial no. 155156, year of manufacture 1994 (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

STAINLESS STEEL HOPPER BOTTOMED TOTE BIN, 1.2m x 1.2m x 900mm deep on straight, 900mm hopper and fork lift skid (note - this lot is situated at IC...

350mm Carier Screw Conveyor, approx. 13.5m long, with three electro/pneumatic slides (C5006) (note - this lot is situated at ICKLEFORD MILL, SG5 3...

350mm Carier Screw Conveyor, approx. 13.5m long, with three electro/pneumatic slides (C5005) (note - this lot is situated at ICKLEFORD MILL, SG5 3...

350mm Screw Conveyor, approx. 13.5m long, with four electro/pneumatic slides (C5004) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

350mm Screw Conveyor, approx. 5m long with, two electro/pneumatic slides (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

500mm Stainless Steel Screw Conveyor, approx. 3m long with 7.5kW geared electric motor (requires attention) (note - this lot is situated at ICKLEF...

Buhler Dust Filter Unit 1m x 3.1m, with Buhler MPS 22/19-G Rotary Seal, spout and centrifugal fan (D5002) (note - this lot is situated at ICKLEFOR...

Aerzen Blower OLA12.5 Unit, with 18.5m kW electric motor (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Sturtevant GLA12.5 Blower Unit, with 18.5kW electric motor (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Derion Rotary Seal, with cyclone receiver (SAL002) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Sturtevant GLA11.5 Blower Unit (5BL002) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Two Magnetic Separators Ptt4515 Magnets, with diverter (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

225mm Mild Steel Screw Conveyor, approx. 13m long (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Eight x 150mm Electro/Pneumatic Slides, with surge hopper and spouts (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

225mm Mild Steel Screw Conveyor, approx. 10m long (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Eight 150mm Electro/Pneumatic Slides, with surge hopper and spouts (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

FOUR STAINLESS STEEL CASED FLOW BALANCERS (IF008/6/4/2) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

FOUR STAINLESS STEEL CASED FLOW BALANCERS (IF001/3/5/7) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Carier 225mm Belt and Bucket Elevator, approx. 25m centres high (E5-1) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Aerzen GMA 13.6 Rotary Blower, No. 722844, with 22kW electric motor, 1996, 1450rpm (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Five Section Motor Control Centre (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Four Bolted Sectional Mild Steel Wheat Feed Bulk Outloading Bins, each 2.7m wide x 2.3m x 9.75 deep on straight, 2.5m on hopper bottom (note - thi...

200mm Belt and Bucket Elevator, approx. 18.2 metres high (WF8) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Rotolok 200RV Rotary Air Seal, with 400mm mild steel cyclone receiver (WF2) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

Mild Steel Cyclone Receiver, with MPE1092 rotary air seal (WF1) (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

150mm Mild Steel Screw Conveyor, approx. 6.5m long (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

150mm Mild Steel Screw Conveyor, approx. 2m long (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)

200mm Mild Steel Screw Conveyor, approx. 5m long (note - this lot is situated at ICKLEFORD MILL, SG5 3UN)